|
| |
| "Currie Enterprises 87-93 YJ CV Driveshaft (use with CE-9069 tailshaft kit)" |
"This is the Currie heavy duty CV driveshaft for use in all 87-93 Jeep YJ Wranglers with up to 2 of lift. This driveshaft may only be used in conjunction with the Currie CE-9069 tailshaft slip yoke eliminator kit."
Price: "299.99"
|
|
| "Currie Enterprises 97-06 TJ CV Driveshaft (use with CE-9069T tailshaft kit)" |
"This is the Currie heavy duty CV driveshaft for use in all 97-06 Jeep TJ Wranglers with up to 4 of lift. This driveshaft may only be used in conjunction with the Currie CE-9069T tailshaft slip yoke eliminator kit."
Price: "339.99"
|
|
| "Currie Enterprises Adjustable Extended Sway Bar End Links" |
"JK front adjustable sway bar links for use with the RockJock� JK off road suspension system. Links feature high strength 6.5 long treaded steel rod, right hand and left hand threaded heim joints and jam nuts, and nyloc nuts for the heim joint studs. Sold as a pair of links."
Price: "75.99"
|
|
| "Currie Enterprises Antirock Front Aluminum Sway Bar System" |
"For 1997-2006 Jeep TJ's and Unlimited's. The Currie Antirock� Sway Bar Kit with aluminum arm option provides balanced performance of front and rear suspension for rugged off-road conditions as well as a light weight, trick looking aluminum arms. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock� Off Road Sway Bar is designed to directly replace the stock Jeep sway bar and is an easy bolt on installation. The sway bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition sway bars. The Currie Antirock� Sway Bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup."
Price: "369.99"
|
|
| "Currie Enterprises Antirock Front Aluminum Sway Bar System" |
"For all models of the '07 and up Jeep JK Wranglers - 2 or 4 door. The Currie Antirock� sway bar kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock� off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, bolt-on billet aluminum frame brackets which feature the RJ logo milled into the sides of them and semi-gloss black powder coat finish, delron bushings, semi-gloss black powder coated arms, adjustable length heim jointed sway bar links, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock moun"
Price: "429.99"
|
|
| "Currie Enterprises Antirock Front Sway Bar System" |
"For all models of the '07 and up Jeep JK Wranglers - 2 or 4 door. The Currie Antirock� sway bar kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock� off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron bushings, semi-gloss black powder coated arms, adjustable length heim jointed sway bar links, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the vehicle's axle housing. The Currie Antirock� sway bar does not ne"
Price: "389.99"
|
|
| "Currie Enterprises Antirock Front Swaybar" |
"Replace your Currie Antirock Sway Bar with this replacement unit."
Price: "149.95"
|
|
| "Currie Enterprises Antirock Rear Sway Bar System" |
"For all 4 door models of the '07 and up Jeep JK Wranglers. The Currie Antirock� rear sway bar kit, when used in conjunction with a front Antirock� sway bar kit, provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock� off road sway bar is designed to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated steel for ultimate strength, which is the same quality used in professional off-road competition sway bars. This kit includes all components for installation including, the sway bar, semi-gloss black powder coated bolt-on steel frame brackets, delron bushings, semi-gloss black powder coated arms, adjustable length heim jointed sway bar links, necessary hardware, and step-by-step instructions. Unit bolts into existing holes in the bottom of the frame rail and attaches to the stock mounts on the veh"
Price: "459.99"
|
|
| "Currie Enterprises Chrome Moly Tie Rod Set W/ Ends & Boots" |
"Replace stock steering linkage with this heavy duty tie rod and drag link set from Currie. 4130 chrome moly 1 x .188 wall tubes provide maximum strength, 2 RH and 2 LH jam nuts are provided, as well as new TRW RH and LH tie rod ends with urethane boots and hardware."
Price: "269.99"
|
|
| "Currie Enterprises Chrome Moly Tie Rods Tubes W/ Jam Nuts" |
"Replace stock steering linkage with these heavy duty tie rod and drag link tubes. 4130 chrome moly 1 x .188 wall tubes provide maximum strength, 2 RH and 2 LH jam nuts are provided, and they will retain stock tie rod ends. Also see our complete kits that include the ends as well."
Price: "159.99"
|
|
| "Currie Enterprises Currectlync Drag Link Adjuster" |
"Adjuster only for pitman arm end of Currie Currectlync� heavy duty drag link. Sold each"
Price: "49.99"
|
|
| "Currie Enterprises Currectlync Drag Link End for H.D. Steering - LH Thread" |
"Left hand thread drag link end for Currie's Currectlync� heavy duty tie rod set is designed with 1 1/8 thread for added strength. Grease fitting provides for increased performance and long life. Includes boot, castle nut, and cotter pin. Sold each"
Price: "49.99"
|
|
| "Currie Enterprises Currectlync Heavy Duty Drag Link - Complete" |
"This is the 1 1/4 forged alloy steel drag link only out of the Currie Currectlync� heavy duty tie rod kit. This unit features an oversized 1 1/8 threaded adjuster, giant clamps, and threaded ball joint end at the pitman arm end, and it provides up to 200% more strength than the original equipment drag link. This unit will only work as a replacement part for the Currie system - it may not be used as in conjunction with any stock tie rod parts. This unit is rated at 200% stronger than than the stock part."
Price: "199.99"
|
|
| "Currie Enterprises Currectlync Heavy Duty Tie Rod" |
"This is the 1 1/4 diameter solid alloy steel tie rod bar for the Currie Currectlync� heavy duty tie rod system - only. Designed to use Currie's 7/8 thread tie rod ends. This unit is rated at 200% stronger than than the stock part. Sold each."
Price: "99.99"
|
|
| "Currie Enterprises Currectlync Heavy Duty Tie Rod - Complete" |
"This is the 1 1/4 diameter solid alloy steel tie rod bar for the Currie Currectlync� heavy duty tie rod system, complete with it's heavy duty 7/8 thread tie rod ends, clamps, and dust boots. This unit is rated at 200% stronger than than the stock part. Sold each."
Price: "189.99"
|
|
| "Currie Enterprises Currectlync RH Tie Rod End for H.D. Steering" |
"Right hand tie rod end for Currie's Currectlync� heavy duty tie rod set is designed with 7/8 thread for added strength. Grease fitting provides for increased performance and long life. Includes boot, castle nut, and cotter pin. Sold each."
Price: "49.99"
|
|
| "Currie Enterprises Currectlync Steering Stabilizer Bracket" |
"This is an oversized steering stabilizer bracket designed to be used on the Currie Currectlync� heavy duty tie rod system, but it may also be used in other universal applications that use 1 1/4 rods. Includes the bracket plate, the two 3/8-24 thread u-bolts, lock washers and nuts. Sold as a kit."
Price: "29.99"
|
|
| "Currie Enterprises Dropped Pitman Arm" |
"This is the dropped pitman arm used in the RockJock� JK off road suspension system. Sold each."
Price: "125.99"
|
|
| "Currie Enterprises EZ Tire Deflator" |
"The EZ deflator allows you to quickly deflate large tires to very low pressures while monitoring the pressure the whole time on a gauge. Sold each."
Price: "29.99"
|
|
| "Currie Enterprises Front Bar Pin Eliminator Kit" |
"Replaces bar pins on after-market front shock installations to properly mount shock absorbers. Prevents the shock eye bushings from the common problem of sliding on the standard style pin during suspension articulation that occurs in off road driving. The original bar pin mounts are not capable of sustaining the abuse of rock crawling - these heavy duty components are machined from billet stock and are gold zinc plated for long life. Sold as a kit."
Price: "49.99"
|
|
| "Currie Enterprises Front Bump Stop Kit" |
"Currie's are the only bump stop on the market that incorporate coil spring retainers. The bump stops extend the suspension stop impact point for proper contact in a 4 lift application. They are made with quality polyurethane components and aluminum spacers. The bump stop mount inside the coil springs and have 'poly' spacers top and bottom. This is a set for the front end only."
Price: "87.99"
|
|
| "Currie Enterprises Front Bump Stop Kit" |
"This is the front poly-urethane bump stop kit out of the RockJock� JK off road suspension system. Kit includes billet aluminum spacers, poly-urethane bump stop pucks, all necessary hardware, and complete instructions. Sold as a pair of bump stops."
Price: "49.99"
|
|
| |
|
