|
| |
| "Currie Enterprises Front Long Travel Leveling Kit" |
"The long travel leveling kit for all models the 2007 and up Jeep JK Wrangler allows you to raise the front of the JK so that it is even with the back, while at the same time increasing the front suspension travel to 9 1/2. This kit includes 2 1/4 coil spring spacers, lower bumpstop extensions - both finished in semi-gloss black powder coat, adjustable extended sway bar links with heim joints and jam nuts, stainless braided extended brake hose kit, all necessary hardware, and detailed installation instructions. When used in conjuction with the CE-9802R JK rear long travel kit, your vehicle can effectively clear 33 tires. Long travel shocks required - sold seperately. See our Rancho and Walker Evans shock options."
Price: "289.99"
|
|
| "Currie Enterprises Front Lower Control Arms" |
"These are the adjustable length Johnny Joint� front lower control arms out of the RockJock� JK off road suspension system. Arms are fabricated from 1.625 o.d. x .250 wall d.o.m. steel tubing, feature the 2 1/2 Johnny Joint� rod end on one end, and the 1 1/4 RH thread forged 2 1/2 Johnny Joint� and jam nut on the other end. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating. Sold as a pair of arms."
Price: "329.99"
|
|
| "Currie Enterprises Front Shackles For Pro Comp Springs" |
"Replace stock shackles with Currie's heavy duty units that feature 1/4 thick steel side plates, Energy Suspension Tough 88 fluted urethane bushings in the larger diameter that fit the larger eye diameter of Pro Comp springs, and heavy duty greasable bolts that feature zerk fittings on their heads for greasing of the bushings. Finished in corrosion proof gold zinc, these also have bolt-in center braces for added rigidity. Sold as a pair."
Price: "79.99"
|
|
| "Currie Enterprises Front Tow Bar Shackles For Pro Comp Springs" |
"Replace stock shackles with Currie's heavy duty units that feature 1/4 thick steel side plates, Energy Suspension Tough 88 fluted urethane bushings in the larger diameter that fit the larger eye diameter of Pro Comp springs, and heavy duty greasable bolts that feature zerk fittings on their heads for greasing of the bushings. Finished in corrosion proof gold zinc, these also have bolt-in center braces for added rigidity as well as a quick-disconnect setup for a tow bar and the tow bar connection pins with retaining snap clips. Sold as a pair."
Price: "89.99"
|
|
| "Currie Enterprises Front Trac Bar Relocation Kit" |
"This is the front trac bar relocating kit out of the RockJock� JK off road suspension system. Kit includes inner and outer bracket and all hardware. Minor welding is required! Detailed instructions included. Sold as a kit."
Price: "44.99"
|
|
| "Currie Enterprises Front Upper Control Arms" |
"These are the adjustable length Johnny Joint� front upper control arms out of the RockJock� JK off road suspension system. Arms are fabricated from 1.25 o.d. x .188 wall d.o.m. steel tubing, feature the 2 Johnny Joint� rod end on one end, and a formed steel fork and jam nut on the other end. New grade 8 bolts are furnished for the frame end of the arms, while the housing end retains the factory hardware. Arms and ends are finished in semi-gloss black powder coat. Sold as a pair of arms."
Price: "249.99"
|
|
| "Currie Enterprises HD Front Lower Control Arm Brackets (Weld-On)" |
"Currie's heavy duty TJ/LJ/XJ/MJ front lower control arm brackets are laser cut and folded out of one piece of 3/16 steel. Require welding to install. Price is for a pair of brackets."
Price: "39.99"
|
|
| "Currie Enterprises Heavy Duty Drag Link" |
"This is the 1 1/4 forged alloy steel drag link only out of the Currie Currectlync� heavy duty tie rod kit. This unit features an oversized 1 1/8 threaded adjuster, giant clamps, and threaded ball joint end at the pitman arm end, and it provides up to 200% more strength than the original equipment drag link. This unit will only work as a replacement part for the Currie system - it may not be used as in conjunction with any stock tie rod parts. This unit is rated at 200% stronger than the stock part."
Price: "109.99"
|
|
| "Currie Enterprises Heavy Duty Front Trac Bar" |
"This component replaces the stock XJ/TJ/LJ/MJ front trac bar with an adjustable length Johnny Joint� unit. This is designed to center the front axle assembly under the vehicle after installation of a lift kit and/or the springs settle. It is made from 1 1/4 heavy wall D.O.M. tubing and it uses a 5/8 bolt at the frame end for added strength, drilling equipment is obviously required for installation. Housing end retains the factory bolt. Sold each."
Price: "229.99"
|
|
| "Currie Enterprises Heavy Duty Rear Shackles" |
"Replace stock shackles with Currie Enterprises heavy duty units that feature 1/4 thick steel side plates, Energy Suspension Tough 88 fluted urethane bushings, and heavy duty greasable bolts that feature zerk fittings on their heads for greasing of the bushings. Finished in corrosion proof gold zinc, these also have bolt-in center braces for added rigidity. Sold as a pair."
Price: "74.99"
|
|
| "Currie Enterprises Heavy Duty Spring Plates (Pair)" |
"Currie's spring plates are built to withstand the most rugged off road abuse. They have a built-on skid plate to protect U-Bolts. The top plate is 5/16 steel and the bottom (skid plate) is stamped out of 1/4 steel. These heavy duty universal spring plates are designed to be used with 2 wide springs and come with bolt on, replaceable shock and sway bar mounts. Price listed is for a pair of plates."
Price: "124.99"
|
|
| "Currie Enterprises Heavy Duty Spring Plates (Pair)" |
"Currie's spring plates are built to withstand the most rugged off road abuse. They have a built-on skid plate to protect U-Bolts. The top plate is 5/16 steel and the bottom (skid plate) is stamped out of 1/4 steel. These heavy duty universal spring plates are designed to be used with 2 wide springs and come with bolt on, replaceable shock and sway bar mounts. Price listed is for a pair of plates."
Price: "104.99"
|
|
| "Currie Enterprises Heavy Duty Spring Plates (Pair)" |
"Currie's spring plates are built to withstand the most rugged off road abuse. They have a built-on skid plate to protect U-Bolts. The top plate is 5/16 steel and the bottom (skid plate) is stamped out of 1/4 steel. These heavy duty universal spring plates are designed to be used with 2 wide springs and come with bolt on, replaceable shock and sway bar mounts. Price listed is for a pair of plates."
Price: "104.95"
|
|
| "Currie Enterprises Johnny Joint 4inch Suspension System" |
"The Currie Johnny Joint� suspension system kit is a complete package that replaces all eight stock control arms and provides a 4 lift. It is engineered to provide unrivaled articulating flexibility and performance in the most adverse off-road conditions. The Johnny Joint� system keeps the tires in contact with the terrain for maximum traction. Kit includes 8 Johnny Joint� control arms, 4 4 lift coil springs, Johnny Joint� adjustable front trac bar, rear trac bar relocation bracket, Currie Antirock� front sway bar, rear sway bar extended links, and the Currie front and rear poly urethane bump stop kits. Rancho RS9000 adjustable shocks sold seperately. When used in conjunction with a 1 body lift and a 1 motor mount lift, this kit allows for efficient use of up to 35 tires."
Price: "1899.99"
|
|
| "Currie Enterprises Johnny Joint Control Arms - Set Of 8" |
"Complete set of 8 Johnny Joint� Control Arms. All arms are fully adjustable allowing the pinion angle and caster angle to be adjusted. This adjustable feature allows your vehicle to be upgraded to different lift amounts without having to replace the control arms in the future. The lower arms are made of 1 1/4 heavy wall D.O.M. tubing, and the upper arms of 1 heavy wall D.O.M tubing. All arms are powder coated gold, and come with zerk fitted grade 8 mounting bolts. To allow complete unrestricted movement, the Johnny Joint� is used at both ends of all 4 of the rear arms, both ends of the front lowers, and on one end of the front upper arms. Also see our CE-9102K Johnny Joint� housing kit for installing Johnny Joints� on the front end housing."
Price: "899.99"
|
|
| "Currie Enterprises Johnny Joint Front End Housing Kit" |
"This kit allows our 2 Johnny Joints� with 7/16 (stock size) thru bolts to be installed on stock or most aftermarket front end housings in place of the standard upper control arm bushings. The kit includes a Johnny Joint� insert for gear case ear and installation tool, as well as 1 thick flame-cut steel upright for the tube side, with Johnny Joint� already installed. This kit has you cut off the top of the stock bracket that is on the tube and install the new Currie piece into the existing bracket base. You then weld the Currie piece to the existing bracket base. This allows for no welding to be done on the tube, resulting in no warpage of the tube.This kit requires cutting and welding equipment for installation!!!"
Price: "159.99"
|
|
| "Currie Enterprises Johnny Joint Front Upper Control Arms" |
"Johnny Joint� front upper control arms are fully adjustable so that you are able to adjust your pinion angle and caster angle after a lift is installed. The arms are fabricated out of 1 heavy wall D.O.M. tubing and feature the Johnny Joint� on the frame ends of the arms only. The opposite end connects to the stock bushing on the front end housing - or you can replace these stock front end bushings with our CE-9102K Johnny Joint� front end housing conversion kit. Sold as a pair."
Price: "229.99"
|
|
| "Currie Enterprises Johnny Joint Lower Control Arms" |
"Johnny Joint� lower control arms may be used front or rear on all TJ/LJ vehicles, and on the front of TJ/LJ/XJ/MJ vehicles. The arms are fully adjustable so that you are able to adjust your pinion angle after a lift is installed. The arms are fabricated out of 1 1/4 heavy wall D.O.M. tubing and feature the Johnny Joint� on both ends of the arms. Sold as a pair."
Price: "259.99"
|
|
| "Currie Enterprises Johnny Joint Rear Trac Bar" |
"The Johnny Joint� rear trac bar includes all of the same features as Currie's trail and race proven Johnny Joint� front trac bar and is the perfect complementing unit to the front bar to optimize you TJ/LJs articulation. This unit, like the front bar, is made from 1 1/4 heavy wall DOM tubing, and also uses the 2 1/2 Johnny Joint� at the frame end, and features a heavy duty bushing at the housing end. Zerk fitted grade 8 hardware & instructions included. Johnny Joint� rear trac bars are available with or without heavy duty trac arm bracket. This unit does not include the bracket and is intended for use on a vehicle that has a relocation bracket already installed, or a Currie rearend installed."
Price: "229.99"
|
|
| "Currie Enterprises Johnny Joint Rear Trac Bar with Housing Bracket Kit" |
"The Johnny Joint� rear trac bar includes all of the same features as Currie's trail and race proven Johnny Joint� front trac bar and is the perfect complementing unit to the front bar to optimize you TJ/LJs articulation. This unit, like the front bar, is made from 1 1/4 heavy wall DOM tubing, and also uses the 2 1/2 Johnny Joint� at the frame end, and features a heavy duty bushing at the housing end. Zerk fitted grade 8 hardware & instructions included. Johnny Joint� rear trac bars are available with or without heavy duty trac arm bracket. This unit includes the heavy duty trac arm housing bracket that allows the trac arm to be installed at the proper angle and position. The heavy duty steel bracket bolts onto the rear axle housing and relocates the trac bar pivot point. Sold each."
Price: "279.99"
|
|
| "Currie Enterprises Johnny Joint Rear Upper Control Arms" |
"Johnny Joint� rear upper control arms are fully adjustable so that you are able to adjust your pinion angle after a lift is installed. The arms are fabricated out of 1 heavy wall D.O.M. tubing and feature the Johnny Joint� on both ends of the arms. Sold as a pair."
Price: "229.99"
|
|
| "Currie Enterprises Rear Bar Pin Eliminator Kit" |
"Replaces bar pins on after-market rear shock installations to properly mount shock absorbers. Prevents the shock eye bushings from the common problem of sliding on the standard style pin during suspension articulation that occurs in off road driving. The original bar pin mounts are not capable of sustaining the abuse of rock crawling - these heavy duty components are machined from billet stock and are gold zinc plated for long life. Sold as a kit."
Price: "49.99"
|
|
| |
|
