|
| |
| "2 inch Johnny Joint� Rod End - Internally Greased, W/ Hardware" |
"For fabricators and suspension system builders. Currie's Johnny Joints� offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint� rod ends are made with a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, and is impervious to weather. The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16 thru bolt hole, and a 2 5/8 mounting width. The outer shell is .180 DOM tubing, and the retaining washers are heat-treated steel. 9/16 greasable bolt with nut and washers included. Sold each."
Price: "37.99"
|
|
| "2 Wheel Drive Low Range Kit for NP231 Transfer Cases" |
"Adds 2-wheel drive low range capability to your transfer case. Great for trails! It reduces loads on front differential for greater maneuverability on surfaces with good traction by eliminating bind. It provides a mechanical disconnect for front and rear output shafts while in neutral, thus allowing a true neutral. The components consist of new sector and fork machined from 4140 steel and heat treated parts. This kit must be installed inside the transfer case."
Price: "259.99"
|
|
| "231 Transfer Case Tail Shaft Conversion Kit" |
"For 1997-2006 Jeep TJ's, LJ's, and late style XJ's with NP231 transfer cases. The Currie tail shaft kit was developed for lifted vehicles to reduce driveline angles. It eliminates the stock slip yoke, and shortens the back of the transfer case by four inches allowing for the use of a 4 longer CV style driveshaft. This decreases the angle of the driveshaft and eliminates all slip yoke bind so that you can lift your Jeep without losing ground clearance from having to lower your transfer case skid plate. The Currie kit retains the stock rear tailshaft housing, and comes complete with a modified original NP231 main shaft so that 100% of the stock strength is retained, main shaft oil seal, CV style driveshaft yoke, and hardware. This kit is completely bolt-on and requires no special tools or machine work. Easy-to-follow instructions and mounting hardware are included. For optimum performance use in combination with the Currie driveshaft part number CE-97984."
Price: "199.99"
|
|
| "231 Transfer Case Tail Shaft Conversion Kit for 1987-1994 Jeep YJ & early model XJ" |
"For 1987-1994 Jeep YJ's and early XJ's. This 231 transfer case tail shaft kit is designed to shorten the YJ NP231 transfer case by four inches. It eliminates the slip yoke, and allows for the use of a 4 longer CV style drive shaft. This design decreases the angle of the driveshaft so that you can lift your Jeep without lowering your skid plate, providing greater ground clearance. The Currie kit comes complete with a modified 231 main shaft, new bearing housing, double-row roller bearing, seal, companion flange, all hardware and detailed instructions."
Price: "249.99"
|
|
| "2inch Forged Johnny Joint� W/ 3/4inch Lh Threaded Stud" |
"All new from Currie, forged Johnny Joints�!!! We have taken the Johnny Joint� to the next level by making a male rod end style forging that accepts the Johnny Joint� internals from our CE-9112 2 Johnny Joints�. This version features a 7/16 thru bolt hole, a 2 mounting width, 2 1/4 of 3/4-16 right hand threads on the shank, and is greasable through the outer shell. Units will also accept our 7/16 greasable thru bolts as well (available seperately). We also keep the jam nuts for these units on hand at all times as well. These can be used in any Currie adjustable upper control arm, as well as in any type of universal application for those building their own arms. Finished in gold zinc plating, sold each."
Price: "39.99"
|
|
| "2inch Forged Johnny Joint� W/ 3/4inch Rh Threaded Stud" |
"All new from Currie, forged Johnny Joints�!!! We have taken the Johnny Joint� to the next level by making a male rod end style forging that accepts the Johnny Joint� internals from our CE-9112 2 Johnny Joints�. This version features a 7/16 thru bolt hole, a 2 mounting width, 2 1/4 of 3/4-16 right hand threads on the shank, and is greasable through the outer shell. Units will also accept our 7/16 greasable thru bolts as well (available seperately). We also keep the jam nuts for these units on hand at all times as well. These can be used in any Currie adjustable upper control arm, as well as in any type of universal application for those building their own arms. Finished in gold zinc plating, sold each."
Price: "39.99"
|
|
| "3 inch Johnny Joint� Rod End - Externally Greased" |
"For fabricators and suspension system builders. Currie's Johnny Joints� offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint. The bushings in the Johnny Joint� rod ends are made with a high-density, tough 88 urethane that encases the inner ball. It is a very durable material, and is impervious to weather. The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16 thru bolt hole, and a 2 5/8 mounting width. The outer shell is .180 DOM tubing, and the retaining washers are heat-treated steel. 9/16 greasable bolt with nut and washers included. Sold each."
Price: "89.99"
|
|
| "4� Johnny Joint Suspension System by Currie Enterprises" |
"The Currie Johnny Joint� suspension system kit is a complete package that replaces all eight stock control arms and provides a 4 lift. It is engineered to provide unrivaled articulating flexibility and performance in the most adverse off-road conditions. The Johnny Joint� system keeps the tires in contact with the terrain for maximum traction. Kit includes 8 Johnny Joint� control arms, 4 4 lift coil springs, Johnny Joint� adjustable front trac bar, rear trac bar relocation bracket, front sway bar disconnects, rear sway bar extended links, and the Currie front and rear poly urethane bump stop kits."
Price: "1779.99"
|
|
| "4� RockJock Suspension System by Currie Enterprises" |
"The RockJock� 4 Off Road Suspension System for the 2-door JK allows for efficient clearance of up to 37 tall tires (with minor trimming) on any model of the 2 door Jeep JK Wranglers. Kit allows for up to 11 of rear wheel travel and 9 1/2 of front wheel travel when used with the recommended shocks. Up to 11 of front travel is attainable when used with specific shocks and some minor trimming to the vehicle. This kit is comprised of only the highest end components in the areas of strength, fit, finish, function, and the R&D testing to back them. Included is the set of 8 Johnny Joint adjustable control arms, set of 4 lifted coil springs, front urethane bump stop kit, rear bump stop spacers, rear coil spring retaining kit, front D.O.T. approved stainless braided extended brake line kit, rear D.O.T. approved stainless braided extended brake line kit, front trac bar relocation kit, rear trac bar relocation kit, relocation kit for the tops of the front shocks, relocation kit for the bottoms of"
Price: "2254.99"
|
|
| "4� RockJock Suspension System by Currie Enterprises" |
"The RockJock� 4 Off Road Suspension System for the 2-door JK allows for efficient clearance of up to 37 tall tires (with minor trimming) on any model of the 2 door Jeep JK Wranglers. Kit allows for up to 11 of rear wheel travel and 9 1/2 of front wheel travel when used with the recommended shocks. Up to 11 of front travel is attainable when used with specific shocks and some minor trimming to the vehicle. This kit is comprised of only the highest end components in the areas of strength, fit, finish, function, and the R&D testing to back them. Included is the set of 8 Johnny Joint adjustable control arms, set of 4 lifted coil springs, front urethane bump stop kit, rear bump stop spacers, rear coil spring retaining kit, front D.O.T. approved stainless braided extended brake line kit, rear D.O.T. approved stainless braided extended brake line kit, front trac bar relocation kit, rear trac bar relocation kit, relocation kit for the tops of the front shocks, relocation kit for the bottoms of"
Price: "2254.99"
|
|
| "Antirock Rear Sway Bar System by Currie Enterprises" |
"This is the complete TJ/LJ bolt on rear Antirock sway bar kit. Kit is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing. Kit includes the 44 sway bar, semi-gloss black powder coated bolt on frame brackets, sway bar bushings, adjustable heim jointed sway bar links, weld on housing tabs, and all necessary hardware. Detailed instructions included. Requires the minor welding of the housing tabs, and trimming of the rear inner wheel wells for sway bar arm travel. Sold as a kit."
Price: "399.99"
|
|
| "Antirock Sway Bar Kit by Currie Enterprises" |
"The Currie Anti-Rock Sway Bar Kit provides balanced performance of front and rear suspension for rugged off-road conditions. It gives the driver increased traction by balancing and distributing the weight over all four tires. The Anti-Rock Off Road Sway Bar is designed to replace the stock Jeep sway bar. The Sway Bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition. This kit includes all components, bushings, hardware and step-by-step instructions. It is positioned through the front cross member and attaches to the stock mounts on the axle housing on Jeep TJ's. The Currie Anti-Rock Sway Bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This Sway Bar may be used on the street however, it will not provide the same performance as the stock setup."
Price: "299.99"
|
|
| "Boomerang Rear Shackles For Procomp Springs" |
"For 1987-1995 Jeep YJ Wranglers that are using Pro Comp springs. These shackles increase rear spring travel by allowing the back eye of the spring to articulate around behind the back end of the frame rail. They feature 1/4 thick steel side plates, Energy Suspension Tough 88 fluted urethane bushings in the larger diameter that fit the larger eye diameter of Pro Comp springs, and heavy duty greasable bolts that feature zerk fittings on their heads for greasing of the bushings. Finished in corrosion proof gold zinc, these also have bolt-in center braces for added rigidity. Sold as a pair."
Price: "79.99"
|
|
| "Currie Enterprises 10inch Finned Aluminum Cooler Kit" |
"Oil coolers are a must for any heavy off roading application. This 10 unit features the extruded aluminum cooler that acts as a heat dissapator, while at the same time increasing fluid capacity. Fittings and hardware for installation are included."
Price: "79.99"
|
|
| "Currie Enterprises 1inch Body Lift" |
"1 body lift for 1987-2006 Jeep YJ and TJ Wranglers, as well as LJ Unlimiteds allows for additional tall tire clearance without exceeding practical suspension lift heights. The Currie billet aluminum body lift pucks are concave on the bottom side to allow the retention of the stock rubber body mounting pucks. This keeps the body isolated from the frame just like stock, so that no more noise or vibration will be transferred to the cab of the vehicle than would be stock. The aluminum pucks are powder coated black for durability, and all of the necessary new longer grade 8 body bolts are included in the kit. We highly recommend the use of the 1 raised heavy duty motor mount kit in conjunction with this body lift to keep all of your underhood and linkage pieces in line with the body where they belong. On a vehicle with a 4 lift and 33 tires, you can install the body lift and motor mount lift and efficiently clear 35 tires."
Price: "179.99"
|
|
| "Currie Enterprises 2-1/2inch Johnny Joint� Assembly / Disassembly Tool" |
"Johnny Joint� tool from Currie is designed to make the assembly and disassembly of our popular 2 ?� Johnny Joint� rod ends simple! Tool can be used either in a bench vise, or it can also be used on the vehicle for repairs and rebuilds of Johnny Joints�. Construction is CNC machined heat treated steel components, ?�-13 all-thread, and premium thrust bearings. Tool is completely rebuildable, and all parts are available through Currie. Tools sold each - multiple tools in picture for illustration purposes only!"
Price: "79.99"
|
|
| "Currie Enterprises 4inch Lift Coil Springs" |
"Currie's heavy duty 4 lift coil springs replace factory springs and are designed to work with Johnny Joint� suspension systems and as replacement spring in other suspension systems. This set features our standard front springs and heavy rate rear springs. Extensive research was done by Currie to develop the perfect combination of rates and quality of the coil springs. The results: they provide the best in comfortable ride and excellent performance on the rocks. Gray powder coated finish. Sold as a set of 4 springs."
Price: "329.99"
|
|
| "Currie Enterprises 4inch Lift Front Coil Springs" |
"Currie front springs will provide 4 of lift to a Jeep TJ Wrangler or LJ Unlimited, or provide 3.5 of lift to an XJ or MJ vehicle. This lift amount will allow for the use of a 33 tire on the TJ/LJs and a 31 tire on the XJ & MJs. When used in a TJ or LJ, in conjunction with a 1 body lift and a 1 motor mount lift, these springs allow for efficient use of up to 35 tires. Extensive research was done by Currie to develop the perfect combination of rates and quality of the coil springs. The results: they provide the best in comfortable ride and excellent performance on the rocks. Gray powder coated finish. Sold as a pair of front springs."
Price: "169.99"
|
|
| "Currie Enterprises 4inch Lift Rear Coil Springs" |
"Currie rear springs provide 4 of lift allowing for the use of a 33 tire on a TJ or LJ. When used in conjunction with a 1 body lift and a 1 motor mount lift, these springs will allow for efficient use of up to 35 tires. Extensive research was done by Currie to develop the perfect combination of rates and quality of the coil springs. The results: they provide the best in comfortable ride and excellent performance on the rocks. Gray powder coated finish. Sold as a pair of rear springs."
Price: "174.99"
|
|
| "Currie Enterprises 4� Lift Front Coil Springs" |
"These are the front coil springs from the RockJock� JK 4 Off Road Suspension System. Springs are custom made by RockJock� to our exacting specs. and are of a dual rate design. Gloss black powder coat finish. Sold as a pair."
Price: "174.99"
|
|
| "Currie Enterprises 4� Rear Springs" |
"These are the rear coil springs from the RockJock� JK 4 Off Road Suspension System. Springs are custom made by RockJock� to our exacting specs. and are of a dual rate design. Gloss black powder coat finish. Sold as a pair."
Price: "169.99"
|
|
| "Currie Enterprises 4� RockJock Suspension System" |
"The RockJock� JK off road suspension system allows for efficient clearance of up to 37 tall tires (with minor trimming) on any model of the 2 door or 4 door Jeep JK Wranglers. Kit allows for up to 11 of rear wheel travel and 9 1/2 of front wheel travel when used with the recommended shocks. Up to 11 of front travel is attainable when used with specific shocks and some minor trimming to the vehicle. This kit is comprised of only the highest end components in the areas of strength, fit, finish, function, and the R&D testing to back them. Included is the set of 8 Johnny Joint adjustable control arms, set of 4 lifted coil springs, front urethane bump stop kit, rear bump stop spacers, rear coil spring retaining kit, front D.O.T. approved stainless braided extended brake line kit, rear D.O.T. approved stainless braided extended brake line kit, front trac bar relocation kit, rear trac bar relocation kit, relocation kit for the tops of the front shocks, relocation kit for the bottoms of the re"
Price: "1959.99"
|
|
| |
|
